Microsoft’s new Windows XP Mode requires hardware virtualization, which is probably one of the more confusing parts to knowing if your computer can support XPM. If you’re not sure what XPM is, check out our screenshot tour here.
The hardware requirements are essentially the same as Windows 7′s minimum requirements, with two exceptions:
CPU: Your CPU must support Hardware Virtualization.
RAM: Instead of a 1GB minimum, Microsoft recommends 2GBs of RAM
You can use tools issued by the hardware manufacturer to check if your processor supports hardware virtualization. You may heard from elsewhere that Securable can be used to check for Hardware-VT, but this post from Neowin shows that Securable is not always correct.
Intel:
1) Download and install the Intel Processor Identification Utility. Run the Utility, click on the CPU Technologies tab and check to see if it says yes beside Intel(R) Virtualization Technology.

2) You can use the Processor Spec Finder if you know the make of your CPU. Simply type in your Processor Number in the second Search box or select a processor family from the drop-down box and find your CPU in the list. I have an Intel Core2Duo e6750 so I’d type in e6750. Once you’ve clicked on your processor, look for Intel® Virtualization Technology under Supported Features.
AMD:
1) Simply download and run the AMD Virtualization Compatibility Utility to check for virtualization support.
Update: Microsoft has provided step-by-step instructions on how to do this with Dell, HP, and Lenovo Thinkpad Systems. Click here for the instructions.
- Depress the F12 key when boot menu text appears at startup
- Select BIOS setup and depress the Enter key
- Using the mouse, expand the Virtualization Support menu item by clicking on the plus to the left of Virtualization Support and select Virtualization
- Check the Enable Intel Virtualization Technology checkbox
- Click Apply
- Click Exit
- Fully shut down (power off), wait a few seconds, and restart your computer
If you attempt to install Windows XP Mode and you are still unable to solve it despite the fact that your processor supports virtualization, then you may have to enable it in the BIOS.
The problem is that the instructions for enabling hardware virtualization are specific for each OEM and there is no set-in-stone method for enabling Virtualization in the BIOS. You would have to Google it or ask your manufacturer.
Read this warning:
If you don’t understand what you are changing, DO NOT change it. If you’re not confident in configuring your BIOS settings, DO NOT configure. As a final word of warning, if you are at any time unsure about a setting, DO NOT change it. If you mistakenly touch a setting that you shouldn’t have touched, it may have drastic consequences on your computer. If you are unsure, seek for help from your computer vendor (Dell,Gateway,HP,etc)

When you see the above screen, you have to press a specific key to enter Setup. As indicated by the red box, instructions for entering Setup are usually located at the bottom of the screen when you first turn on your computer. Just hit that key and you should enter Setup. Hardware Virtualization can be enabled from Setup. After configuring, Save and Exit is required for settings to take into effect.
Related posts:
Tags: windows 7, windows xp mode, xp mode, xpm
I’ve got Windows 7 running on my MacBook and I must say, it’s fast, reliable and just works. The XPM booted right up, set itself up and was running within minutes. Had absolutely no problems whatsoever. Absolutely wonderful OS.
Does that mean you will be switching over to Windows 7? xD
Well I’ve still got mad love for OS X but it does mean I will be purchasing a machine with Vista and upgrading it to Windows 7.
Why not use both, I say!
Nice to see someone with an open view of both OSes =). Don’t forget if you buy a Vista-equipped machine after June 28th, it’s rumored that you’ll be eligible for a free upgrade to Windows 7
XPM runs like a breeze on my laptop with only a 1.6 GHz Turion x64 processor. I do have a lot of RAM though (4 GB) and I am able to allocate 2 GB to XPM. Now if only my hard drive at 5400 RPM would be swapped out for a 7200 RPM or even an SSD. 7200 RPM sounds more realistic right now.
[...] If you are still unsure if you can run Windows XP Mode, please visit this article for more information. [...]
[...] If you are still unsure if you can run Windows XP Mode, please visit this article for more information. [...]
[...] If you are still unsure if you can run Windows XP Mode, please visit this article for more information. [...]
[...] As far as hardware requirements go, Microsoft recommends at least 2GB of RAM – and of course the machine’s processor must support hardware virtualization. Have a look at this blog post for details about hardware requirements, and how to determine if your processor supports hardware virtualization: Windows 7 and Windows XP Mode: Can you run it? [...]
I’m running win7 x64 on a dell xpsm1730 and so mode runs like a dog
Hello! can anybody help me please, my CPU doesn’t support XP mode for windows 7. Can anyboy tell me other to run it?
Yes I Can……Ha ha,I,m running on aa Asus motherboard and a Amd dual core c.p.u. and 4 gig ram and have notta problem with the xp mode!!
How to change the mode………..?
I just got Vista and will wait till al the bugs are outta 7